1000KVA- Energy Saving Unit - ELC - 3P1000

ELC line conditioner is a voltage optimization and protection device that adjusts the network voltage to the optimum value, corrects the phase imbalance, and protects expensive equipment by filtering electrical noises so that electrical devices and machines can operate at the highest efficiency for the longest time. It is mostly used in networks with high voltage, phase asymmetry, electrical noise and harmonic distortion problems. It is designed to provide energy savings between 5% and 20% depending on voltage and load characteristics.

●Voltage Optimization and protection function
Energy Saving Feature
●Special management software for energy saving
Maintenance-free Thyristor Technology
●1.000 kVA Power, 3P+N
It can be produced as 1 Phase and 3 Phase Input
Suitable for all industrial voltages
Voltage reduction up to 30%
Voltage boost up to 15%
Response time: 20msec
Voltage correction time: 100msec-200msec
100% Unbalanced Voltage and Load Capacity
Continuous protection against voltage fluctations
Efficiency > 98%
Operator Panel with 4x20 LCD display
Electronic Overload, Over-Temperature Protection
Low Voltage / High Voltage Protection
Suitable design for industrial environment
TS EN ISO 9001: 2015 Quality Certified



ELC Line Conditioner&Energy Saver General Features
Power (kVA)1.000 kVA
TechnologyThyristor Technology, High-speed Voltage Regulation, Maintenance-free design
Input
Rated Input Voltage3 Phase Model: 400VAC 3Phase+Neutral+Ground (Different voltages are optional)
Voltage ToleranceXS Model +%20 S Model -%10 , +%25
Frequency50 Hz. +/-%5 (60 Hz. Optional)
Output
Rated Output Voltage3 Phase Model: 400VAC 3Phase+Neutral+Ground (Different voltages are optional)
Voltage Tolerance+/-%2
Frequency50 Hz. +/-%5
Overload Capacity125% 1 minute, 150% 10 seconds, 151% and above 0.2 seconds
Response Time20 msec
Correction Time100msec-200msec.
Efficiency> 97% typical
Network Filtering and Energy Saving Options
8Energy Savings calculation and monitoring softwareSpecial software developed to measure and monitor the Actual Saving rate
Harmonic Filter Unit (Optional)Passive Harmonic Filter specially designed for the project (designed according to the measurement report)
EMC Filter Unit (Optional)EMC filter for protection and high performance of sensitive electronic equipments
Automatic By-Pass (Optional)Automatic by-pass system to work in ECO mode in case of Low Voltage and Low load.
Management Monitoring and Communication Interfaces
Operator panel with LCD DisplayInput Voltage, Output Voltage, Load Percentage, Frequency, Status Information, Fault Information, Parameter settings
Remote Management Interface (optional)Browser-based remote management with Ethernet connection MOD-BUS RTU with RS485 connection
Protection Functions
Voltage ProtectionElectronic protection for Low Voltage and High Voltage
Current ProtectionInput Circuit Breaker (Output Circuit Breaker optional)
Overload ProtectionElectronic Overload Protection (1 minute at 125% overload, 10 seconds at 150% overload, at >151% overload the power to the load is cut off after 0.2 seconds.)
Over-Temperature ProtectionElectronic Over-Temperature Protection (Fan cooling works at 50°C. At 80°C, the power to the load is cut off.)
Over -Voltage /Surge ArresterOver-Voltage Protection Surge Arrester Class-I or Class-II (optional)
Environmental Conditions
Operating temperature-10 °C ~ +40 °C
Altitude Operating Height1.500m
Humidity90% none condensed
Acoustic Noise< 65dB (at 1m distance and doors closed)
Cabinet Specifications
Type – Protection ClassFree Standing Modular Cabinet, IP21 Indoor type
Paint – ColorEpoxy-Polyester Powder Paint - RAL 7032
CoolingForced air cooling with thermostat controlled fan
OPTIONCODEDESCRIPTION
Non-standard Operating voltage valuexxxVELC series voltage regulators can be produced at any required operating voltage value.
Non-standard operating voltage rangeXS,SELC series voltage regulators can be produced at different input voltage range. The required levels must be stated clearly by the order confirmation. Maximum input voltage range: -%60, +%40
Non-standard output voltage tolerance4T,5T,
4C,5C
Output voltage tolerances of ELC regulators can be +/-1%, +/-2%, -3%, +/-5%
Adjustable output voltageADJOutput voltage of VOR series regulators can be adjusted by the LCD panel. Maximum adjusting range is +/-15%
Non-standard frequencyFRQELC series voltage regulators are produced to function with 60Hz network frequency. 
Output protection MCCBOCBOptional MCCB may be added to the regulator output to provide additional protection.r
Reactive Power Compensation SystemRGSReactive Power Compensation System can be added recording to customer needs
Maintenance By-Pass SwitchMBPA Maintenance By-Pass switch can be added to the ELC Line Conditioner&Saver, which ensures that the loads are transferred to the grid in case of maintenance or failure. Maintenance By-Pass switch is an I-0-II position changeover switch and is manually controlled. During the Maintenance By-Pass operation, the power to the loads is cut for a short time.
Harmonic FilterHFHarmonic filters specially designed for the project to eliminate the negative effects of harmonic distortions and increase efficiency connect to the input or output of the ELC. Filter needs and features are evaluated separately for each project.
Automatic uninterruptible
By-Pass
ABPAutomatic Uninterruptible By-Pass unit may be added to the output of VOR series voltage regulators.
Isolation TransformerTRFIsolation Transformer or Voltage Changing Auto-Transformer can be supplied for both input and output of VOR series voltage regulators. Reguired transformer specification must be given by the order
Special enclosureKVOR series voltage regulators can be produced both INDOOR and OUTDOOR in special cabinets having different IPXX protection classes.
EMC Filter EMCSpecially designed EMC-Filters can be added optionally to the both input and output of VOR series voltage regulators. Filter specifications must be stated by offer/order.
Surge ProtectorSPDHigh-Voltage Protection and Surge Arrester can be added to the both input and output of VOR series voltage regulators. The required protection classes and the specifications (CLASS-I, CLASS-II, SLASS-III) must be given with the order.
Remote monitoring and management unitRMUFor remote monitoring and managing of VOR series voltage regulators, Remote Management and Monitoring unit can be added optionally.No any other software is needed for this RMU unit which provides a browser based communication over LAN- connection or internet.
Dry contactsCNO-NC dry contactor sockets can be applied for ON-OFF and Automatic By-Pass modes of the regulators.
Non-standard Input/Output terminalTAccording to the various customer needs. Input and output terminals can be designed and located specially on the cabinet. The required terminal drawings must be supplied together with the offer/order.
Special design and accessoriesSPMVOR voltage regulators can be designed specially with respect to direct customer needs and teachnical specifications. All special requirements and detailed teachnical drawings and specifications for accessories must be provided by the customer at the offer/order stage.
Parallel connection management unitPCMUp to 4 svs units can be connected in parallel for special high power aplications. A PCM unit is used for management and syncronization when svs unit are connected in parallel.
Special operating temperatureSOTCustom device these can operate in special operating temperatures can be manufactured on demand.
Wooden CaseWCRWooden case and special packaging compatible with international shipment standards
What is ELC Line Conditioner&Saver?

ELC Line Conditioner&Saver is a voltage optimization and protection device that adjusts the network voltage to the optimum value, corrects the phase imbalance, and protects expensive equipment by
filtering electrical noises so that electrical devices and machines can operate at the highest efficiency for the longest time.

It is mostly used in networks with high voltage, phase asymmetry, electrical noise and harmonic distortion problems. It is designed to provide energy savings between 5% and 20% depending on voltage and load characteristics.

How Does It Work?




ELC Line Conditioner&Saver works on the principle of injecting voltage to the load supply voltage by the help of transformer connected in series between the network and load.
The sensitive measuring circuits on the microprocessor-based management board measure voltage drops and fluctuations, calculate the voltage to be increased or decreased, and perform voltage injection with Thyristor switches.
The software algorithm specially developed for the ELC Line Conditioner&Saver allows the most accurate voltage value to be set for the machines and equipment to operate at the highest efficiency. ELC Line Conditioner&Saver's special software measures and records the actual energy saving rate. This information is interpreted by the engineers and the output voltage parameters are optimized for higher savings.
In order to ensure the highest efficiency and longevity of electrical machines and equipments, harmonic filter and EMC filter units that filter electrical noises and harmonic distortions in the network voltage can be added optionally.

Optimization filtering and protection solutions for highest efficiency

Design Features

ELC Line Conditioner&Saver is customizable. They are produced on order by adding options according to the network voltage characteristics, installation features, load characteristics and special requests of the customer. Following are the performance features and protection functions that can be selected while keeping the basic production technology the same.

Input Voltage Range - Output Voltage Tolerance

The input voltage range of the ELC Line Conditioner&Saver is determined at the order and cannot be changed later.

There are 2 models as standard.

XS Model : -0% , +20% S Model : -10% , +25%




There are 2 options for output voltage tolerance in ELC Line Conditioner&Saver as +/- 1% and +/- 2%.
The output voltage tolerance is related to the thyristor configuration used and affects the manufacturing cost.

Standard type three phase ELC Line Conditioner&Savers can operate in 3 Phase + Neutral (4 wire) installations. Neutral connection is required for safe operation. However, for special needs, it can also be produced in accordance with 3-Phase 3-Wired Delta connection installations.

Operating Performance at Low-High Voltage

ELC Line Conditioner&Savers are designed to operate continuously at full load at the lowest and highest value of the network voltage.
Input fuse, power transformers and thyristors of ELC Line Conditioner&Savers are selected to 
operate at full load.

Optional Filters

EMC Filter

EMC filters can be added at the input and output of the ELC Line Conditioner&Saver. High electrical noises in the network voltage may adversely affect the safe operation and performance of sensitive electronic devices and machines. Electrical noise is reduced to levels that do not damage sensitive electronic equipment by adding EMC filters at the input and output of the ELC Line Conditioner&Saver. Filter needs and features are evaluated separately for each project.

Harmonic Filter

Harmonic filters can be added at the input and output of the ELC Line Conditioner&Saver. High harmonic distortions in the network voltage may adversely affect the safe operation and performance of sensitive electronic devices and machines.
Harmonic filters specially designed for the project to eliminate the negative effects of harmonic distortions and increase efficiency connect to the input or output of the ELC. For the design of harmonic filters, it is necessary to measure the harmonic distortions in the network. Filter needs and features are evaluated separately for each project.

Full Protection with Fast and Durable Thyristor Technology

In ELC Line Conditioner&Savervoltage increasing and voltage decreasing are done using THYRISTOR switches. There are no moving mechanical parts such as motors or brushes inside the device and no maintenance is required.
Voltage regulation is done from AC to AC directly. It doesn’t create harmonic distortion on network or load voltage.
ELC Line Conditioner&Saver is equipped with protection systems of Low Voltage, High Voltage, Overload and Over Temperature for safe operation of critical industrial devices.

Internal Automatic By-pass (Optional)

An internal bypass can be added to the ELC Line Conditioner&Saver, which ensures uninterrupted transfer of loads to the network in case of overload or internal fault.
In case of overload or failure, the circuit of internal bypass short-circuits the secondary side of booster transformer, provides a direct connection from the network to output.

Maintenance By-Pass Switch (optional)

A Maintenance By-Pass switch can be added to the ELC Line Conditioner&Saver, which ensures that the loads are transferred to the grid in case of maintenance or failure. Maintenance By-Pass switch is an I-0-II position changeover switch and is manually controlled. During the Maintenance By-Pass operation, the power to the loads is cut for a short time.

Advantages

  • It can be produced as 3 Phase and 1 Phase
  • It can be customized according to customer demands.
  • Cabin design, dimensions and electrical connection features can be redesigned according to the project needs.
  • It is small in size and compact structure.
  • It has filter options
  • It has measuring and monitoring software
  • It Saves Energy


Remote Monitoring and Management

Ethernet Web Server (Optional):

It is designed for remote monitoring via network. The whole system can be monitored and managed with an Ethernet cable. The remote management interface is designed as browser-based. It can be connected from any computer with a web browser. No additional software is required.
With remote management interface; all parameters of ELC Line Conditioner&Saver can be monitored and some parameters can be changed.
There is two-step password protection for accessing the remote monitoring interface.

MOD-BUS RTU (Optional):

It is designed for monitoring and management via Mod-Bus. The whole system can be monitored and managed by connecting with a cable. All parameters of ELC Line Conditioner&Saver can be monitored and some parameters can be changed.

The ELC Line Conditioner &Saver has an ergonomic and user-friendly Operator Panel designed for management and monitoring.

All operating parameters of the ELC Line Conditioner&Saver can be monitored from this panel and some operating parameters can be adjusted. There is two-step password protection for parameter changing.

Monitorable parameters: Input Voltages, Output Voltages, Load Percentages, Energy Save Rates, Operating Frequency, Date-Time, Device status information, Fault and error codes.
Changeable Parameters: Output Voltage Set Value (limited), Date-Time information.

1. LCD Display Operator Panel (Standard)

- 4 lines 20 characters LCD display
- Mimic Diagram
- Light indicators
- 5 pcs selection and application buttons
- Three Language Options (On Order)
- Economical and long-lasting
Document Name
Download
ELC ELC English Catalog
Edit Elektronik 2023 © All rights reserved.