| Harmonic Filter: |
| Harmonic current may cause malfunctions of load or regulator. Harmonic filter is adviced to install input of UPS and Voltage Regulators optionally against of the probable defects of harmonic current.
In present, usage of non linear loads such as computers, fluorescent safety lightining ext. is increased. This kind of non linear loads create high levels of current . This may cause some seriuos problems such as;
Overheating in electrical distrubition equipment or cables.
Failures on computers and similar devices.
Increases total power consumption
EDIT harmonic filter eliminates the harmonic current. Increase reliability of electrical installation and quality of electrical supply. Removes the need for oversized electrical installation thus you may choose UPS, Generator or Voltage Regulator just equal power as your loads and use them efficiently.
|
| Static Transfer Unit (STS): |
| EDIT STS is an automatic power transfering unit which supplies power to a system or a load from 2 indepented AC sources. It improved for the areas either generator is in usage or special applications wherever two different power sources are in usage.
In normal conditions, EDIT STS feedes loads from defined primery source. When there is a disconnection or high/low voltage circumtances, transfers the load to secondary source. If there is a disconnection or high/low voltage circumtances in both 2 sources, it separates the loads from sources and eliminates probable malfunctions .
|
| Compensation Unit: |
| It is need to be used compensation panels to reduce the high electricity bills due to reactive power consumption. Our aim is to supply troubleness solutions with STATIC ELECTRONIC compensation panels instead of clasical contactor - stepped compensation panels. Kindly please contact with our sales department to choose an efficient compensation panel in design and capacity of your firm.
|
| ediTel - 1860 switch mode DC Power Supplies: |
| Designed and produced for Telecom systems. Input voltage interval is 160 - 280 V AC, output interval is -48 V DC. Available to be paralleled between 30 A and 400 A. Through each unit of microprocessor controlled fiber- optical communication capacity, it can communicate with other Power Supplies and central control unit. It has the capacity to work with high efficiency as equipped with resonance converter technology at output and with PFC unit at input.
It has the capacity to communicate directly with telecom systems due to Fiber-optical and RS 232 intermediate units.
The system consists of central control unit, paralellable Power Supply units, AC and DC distribution units and 19 inch rack POWER CABINET containing all these units.
|
| RFI Filter: |
| RFI interference may cause defect on devices, loss of data or component failure. The reason may be load or the power supply . RFI filter can be installed input or output of UPS or Voltage Regulators optionally against of the probable defects of RFI interference
|
| Surge Arrester: |
| Overcurrent or lightining may cause failure of your devices or the regulator. Surge Arrester can be installed on the regulator to eliminate the risk. Kindly please, inform your customer represantative if you have this kind of risks.
|
| Isolation Transformer: |
Isolation transformer is a very good solution to eliminate the bad effects of main noise problems to your devices.
Manuel BY-PASS, input/output harmonic filter, RFI filter, LCD display, RS-232 / SNMP comminucations can be added optionally.
|
